Nouvel examen de certification Cisco CCNP ENCOR 350-401

9 minutes de lecture

Détails de l'examen de certification ENCOR 350-401

  • Nom: ENCOR
  • Code: 350-401
  • Prix: inconnu
  • Titre délivré: Implementing Cisco Enterprise Network Core Technologies v1.0
  • Durée de l'examen: 120 minutes + 30 minutes
  • Nombre de questions: inconnu
  • Seuil de réussite: inconnu
  • Site officiel de l'examen ENCOR 350-401

Objectifs de certification ENCOR 350-401

1.0 Architecture - 15%

  • 1.1 Explain the different design principles used in an enterprise network

    • 1.1.a Enterprise network design such as Tier 2, Tier 3, and Fabric Capacity planning
    • 1.1.b High availability techniques such as redundancy, FHRP, and SSO
  • 1.2 Analyze design principles of a WLAN deployment

    • 1.2.a Wireless deployment models (centralized, distributed, controller-less, controller based, cloud, remote branch)
    • 1.2.b Location services in a WLAN design
  • 1.3 Differentiate between on-premises and cloud infrastructure deployments

  • 1.4 Explain the working principles of the Cisco SD-WAN solution

    • 1.4.a SD-WAN control and data planes elements
    • 1.4.b Traditional WAN and SD-WAN solutions
  • 1.5 Explain the working principles of the Cisco SD-Access solution

    • 1.5.a SD-Access control and data planes elements
    • 1.5.b Traditional campus interoperating with SD-Access
  • 1.6 Describe concepts of wired and wireless QoS

    • 1.6.a QoS components
    • 1.6.b QoS policy
  • 1.7 Differentiate hardware and software switching mechanisms

    • 1.7.a Process and CEF
    • 1.7.b MAC address table and TCAM
    • 1.7.c FIB vs. RIB

2.0 Virtualization - 10%

  • 2.1 Describe device virtualization technologies

    • 2.1.a Hypervisor type 1 and 2
    • 2.1.b Virtual machine
    • 2.1.c Virtual switching
  • 2.2 Configure and verify data path virtualization technologies

    • 2.2.a VRF
    • 2.2.b GRE and IPsec tunneling
  • 2.3 Describe network virtualization concepts

    • 2.3.a LISP
    • 2.3.b VXLAN

3.0 Infrastructure - 30%

  • 3.1 Layer 2 : 3.1.a Troubleshoot static and dynamic 802.1q trunking protocols

  • 3.1 Layer 2 : 3.1.b Troubleshoot static and dynamic EtherChannels

  • 3.1 Layer 2 : 3.1.c Configure and verify common Spanning Tree Protocols (RSTP and MST)

  • 3.2 Layer 3 : 3.2.a Compare routing concepts of EIGRP and OSPF (advanced distance vector vs. linked state, load balancing, path selection, path operations, metrics)

  • 3.2 Layer 3 : 3.2.b Configure and verify simple OSPF environments, including multiple normal areas, summarization, and filtering (neighbor adjacency, point-to-point and broadcast network types, and passive interface)

  • 3.2 Layer 3 : 3.2.c Configure and verify eBGP between directly connected neighbors (best path selection algorithm and neighbor relationships)

  • 3.3 Wireless : 3.3.a Describe Layer 1 concepts, such as RF power, RSSI, SNR, interference noise, band and channels, and wireless client devices capabilities

  • 3.3 Wireless : 3.3.b Describe AP modes and antenna types

  • 3.3 Wireless : 3.3.c Describe access point discovery and join process (discovery algorithms, WLC selection process)

  • 3.3 Wireless : 3.3.d Describe the main principles and use cases for Layer 2 and Layer 3 roaming

  • 3.3 Wireless : 3.3.e Troubleshoot WLAN configuration and wireless client connectivity issues

  • 3.4 IP Services : 3.4.a Describe Network Time Protocol (NTP)

  • 3.4 IP Services : 3.4.b Configure and verify NAT/PAT

  • 3.4 IP Services : 3.4.c Configure first hop redundancy protocols, such as HSRP and VRRP

  • 3.4 IP Services : 3.4.d Describe multicast protocols, such as PIM and IGMP v2/v3


4.0 Network Assurance - 10%

  • 4.1 Diagnose network problems using tools such as debugs, conditional debugs, trace route, ping, SNMP, and syslog

  • 4.2 Configure and verify device monitoring using syslog for remote logging

  • 4.3 Configure and verify NetFlow and Flexible NetFlow

  • 4.4 Configure and verify SPAN/RSPAN/ERSPAN

  • 4.5 Configure and verify IPSLA

  • 4.6 Describe Cisco DNA Center workflows to apply network configuration, monitoring, and management

  • 4.7 Configure and verify NETCONF and RESTCONF


5.0 Security - 20%

  • 5.1 Configure and verify device access control

    • 5.1.a Lines and password protection
    • 5.1.b Authentication and authorization using AAA
  • 5.2 Configure and verify infrastructure security features

    • 5.2.a ACLs
    • 5.2.b CoPP
  • 5.3 Describe REST API security

  • 5.4 Configure and verify wireless security features

    • 5.4.a EAP
    • 5.4.b WebAuth
    • 5.4.c PSK
  • 5.5 Describe the components of network security design

    • 5.5.a Threat defense
    • 5.5.b Endpoint security
    • 5.5.c Next-generation firewall
    • 5.5.d TrustSec, MACsec
    • 5.5.e Network access control with 802.1X, MAB, and WebAuth

6.0 Automation - 15%

  • 6.1 Interpret basic Python components and scripts

  • 6.2 Construct valid JSON encoded file

  • 6.3 Describe the high-level principles and benefits of a data modeling language, such as YANG

  • 6.4 Describe APIs for Cisco DNA Center and vManage

  • 6.5 Interpret REST API response codes and results in payload using Cisco DNA Center and RESTCONF

  • 6.6 Construct EEM applet to automate configuration, troubleshooting, or data collection

  • 6.7 Compare agent vs. agentless orchestration tools, such as Chef, Puppet, Ansible, and SaltStack


Laisser un commentaire